supermanotorious said:In case I run out of cable, I could use what I have for the fused positive run, then use the frame to carry the negative from battery bank to inverter. Anyone see why this wouldn't work?
I assume you noted that the battery monitor is only rated for up to 100 amps and the inverter you listed earlier can pull 160-180 amps.supermanotorious said:well I heeded the advice, I bought some legitimate 2/0 gauge pure copper welding wire for the runs which are approximately 8' long from battery bank to inverter
I'll post pictures of the wire run on my inverter project thread
I also thought I'd experiment with this battery monitor which should arrive later this week
https://www.amazon.com/gp/product/B013PKYILS
AStravelers said:I assume you noted that the battery monitor is only rated for up to 100 amps and the inverter you listed earlier can pull 160-180 amps.
AStravelers said:I assume you noted that the battery monitor is only rated for up to 100 amps and the inverter you listed earlier can pull 160-180 amps.