cdhayden57
New member
- Joined
- Feb 26, 2017
- Posts
- 1
My slide has started to click at the motor when I bring it in to around 8 to 10 inches. Just replaced the nylon gear and metal gear. My room actuator was stuck in the out position. I took it out, loosened the bearings in the end where it screws in and out, put everything back together and it still clicks. Am sitting fairly level according to my 6' level. It seems like the slide is wanting to go out faster on the pickup side thus making it click. How can I get it to stay aligned going out and coming in? It seems like they should have two actuators instead of one. Any and all info will be greatly appreciated.