Wiring jensen stereo jwm6a

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
T

Tbz5000

New member
Joined
Mar 4, 2017
Posts
2
I am replacing the stock linear series model Ls4000b stereo unit with a jensen jwm6a model. I messed up the wiring at some point. The new unit powers on. No sound. Get a little clipping from the center speakers.  The jensen unit has wires for a,b,c speakers.  The wires I'm connecting the unit to  only have a,b speakers.  So I didn't  connect the C speaker wires,just capped them with a wire nut.  Couldn't find much info on how to go about connecting the jensen unit wires to the old wires in the rig. Thanks for help
 
Further research indicates that the old unit has a common ground system, both left  speakers A an B are connected with a common ground as well as the right side speakers. The new unit has floating ground if I am correct on this. It has both positive and negative wires for each set of speakers.  What's the best way to go about this?
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,121 (members: 28, guests: 1,093)

Forum statistics

Threads
131,930
Posts
1,387,710
Members
137,681
Latest member
skidsteerpilot
Back
Top Bottom