EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: The best way to install LED outdoor light strips  (Read 622 times)

Triple Slide Jayco

  • ---
  • Posts: 340
The best way to install LED outdoor light strips
« on: March 31, 2017, 11:48:05 AM »
Hello, what is the easiest/ best way to install those LED light strips that come flexible and are about 16 foot long. I want to put one under the camper at the edge of TT towards the main door along the side. Id rather it be somewhat hidden either connected to the rounded aluminum trim edge that rolls under the TT or attached to the direct underside. I would run the main power wire from below up into the outdoor kitchen area for that connection. Thoughts.?
2016 Jayco TT Triple slide 33RBTS
2016 Chevy Tahoe

Kevin Means

  • Forum Staff
  • ---
  • *
  • Posts: 3821
    • Tactical Flying
Re: The best way to install LED outdoor light strips
« Reply #1 on: March 31, 2017, 12:19:43 PM »
Here's a link to a lengthy discussion about the same thing. Near the end of the last page, there's a write-up and some pictures of what you're trying to do.      http://www.rvforum.net/SMF_forum/index.php/topic,70700.msg886821.html#msg886821

Kev
2011 Winnebago Tour 42QD
Towing a Jeep Rubicon Unlimited LJ or an Acura MDX
RVI Brake 2, Minder TM-66 TPMS, 970 watts of solar
(Can't wait to spend more time RVing)
Lakeside, California

Triple Slide Jayco

  • ---
  • Posts: 340
Re: The best way to install LED outdoor light strips
« Reply #2 on: March 31, 2017, 01:52:13 PM »
Got it, I will look at that track. Not sure of pricing, but I have seen the white drywall corner molding used as well. Pretty cheap, flexible etc. Thank you!
2016 Jayco TT Triple slide 33RBTS
2016 Chevy Tahoe

 

Hosted by Over The Network