EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: awning tension  (Read 293 times)

bryangee

  • ---
  • Posts: 10
awning tension
« on: April 04, 2017, 05:43:06 PM »
hello , awhile ago I replaced the roof on my motorhome and my boys and I just put the awning back on . we put the upper brackets in the exact same spot as before to insure alignment would be the same. everything went good until I noticed that the awning now when it winds up doesn't keep a tight roll at the top. so when it is in the "park " position it isn't a tight roll.
im thinking maybe that we didn't warp the top over enough when we put it back on so we lost a little tension on the spring at the top.

is there a way for my to just add some tension to the spring with out taking the entire awning down again ?

Triple Slide Jayco

  • ---
  • Posts: 339
Re: awning tension
« Reply #1 on: April 04, 2017, 05:54:24 PM »
Yes, youtube the install process and it will show that you may have missed a step, or how to do it.
2016 Jayco TT Triple slide 33RBTS
2016 Chevy Tahoe

johnhicks

  • ---
  • Posts: 130
Re: awning tension
« Reply #2 on: April 04, 2017, 09:33:24 PM »
Yes and follow the video or you'll bust your fingers.

 

Hosted by Over The Network