EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Mounting panels?  (Read 241 times)

ShreddinPB

  • ---
  • Posts: 28
Mounting panels?
« on: May 15, 2017, 08:41:09 PM »
Hey guys, I am planning on mounting some panels on the roof of my 97 Winnebago Adventurer. I got the fairly standard non drilling type mounts
https://www.amazon.com/gp/product/B01LWASUU1/ref=oh_aui_detailpage_o08_s01?ie=UTF8&psc=1
I also read I should use sikaflex 252 to mount them. I read that some materials need primered to work with sika 252, I looked in their primer chart and dont see fiberglass listed (I believe that is what my roof is made of)
Also, I did try to find some to order and it seems difficult to locate in time ( I plan on mounting the panels this weekend) Are there any alternatives?
Thanks!

Wireman134

  • ---
  • Posts: 75
Re: Mounting panels?
« Reply #1 on: May 15, 2017, 09:10:28 PM »
3M VHB tape and 3M 4000UV adhesive/sealant
2000 Silverado 1500 EC Z71 5.3L 325 hp DS intune, Airlift, 34" Alu 1.25"radiator, B&M 70266 trans cooler, oil cooler, Vet servo, Mag- Hytec, Pro comp ES9000, SUV brakes
2015 Venture Sonic 220VBH, 300W Solar/350 ahr AGM/1200w inverter, 75W Dual Band Ham base. Camping weight 5,100lbs on dual 2800 axle

ShreddinPB

  • ---
  • Posts: 28
Re: Mounting panels?
« Reply #2 on: May 16, 2017, 12:14:38 PM »
I have some of that also, is that better than sikaflex 252?
« Last Edit: May 16, 2017, 12:21:08 PM by ShreddinPB »

Wireman134

  • ---
  • Posts: 75
Re: Mounting panels?
« Reply #3 on: May 16, 2017, 05:27:59 PM »
Compere the shear psi. Iso alcohol gel coat only prep needed for direct bond.
2000 Silverado 1500 EC Z71 5.3L 325 hp DS intune, Airlift, 34" Alu 1.25"radiator, B&M 70266 trans cooler, oil cooler, Vet servo, Mag- Hytec, Pro comp ES9000, SUV brakes
2015 Venture Sonic 220VBH, 300W Solar/350 ahr AGM/1200w inverter, 75W Dual Band Ham base. Camping weight 5,100lbs on dual 2800 axle

 

Hosted by Over The Network