Hey everyone,
Not sure if this has been posted or not but I thought I would draw your attention to a great inverter released by Go power.
For those of use who have 50amp service in our trailers trying to run off batteries becomes well quite the endevour. So with out further suspense i present to you the (Insert drumroll)
The Go Power GP-IC-2000-12
What makes this so great you might ask?? Well its the only split-phase inveter that wont break the bank that is a simple drop in inverter that will allow you to maintain true 50a service on both the legs going to your panel.
I installed this bad boy just prior to heading out for may long. Took me 15 minutes to install it. All i did was take the existing cable from the panel coming from the ATS and wire it in to the inverter. This allows me to use my generator or shore power and because the inverter itself allows for 50a per leg its great. Then I ran a new cable from the inverter to the ac panel in my trailer. I disconnected my converter that is stock because this inverter is also a charger.
So to recap here's my installation.
Shore power / Generator ----> Automatic Transfer Switch ----> ______________ ----> AC Panel of trailer
|GP-IC-2000-12 |
Battery Bank <-------------------------------------------------> |____________ |
Not sure if this has been posted or not but I thought I would draw your attention to a great inverter released by Go power.
For those of use who have 50amp service in our trailers trying to run off batteries becomes well quite the endevour. So with out further suspense i present to you the (Insert drumroll)
The Go Power GP-IC-2000-12
What makes this so great you might ask?? Well its the only split-phase inveter that wont break the bank that is a simple drop in inverter that will allow you to maintain true 50a service on both the legs going to your panel.
I installed this bad boy just prior to heading out for may long. Took me 15 minutes to install it. All i did was take the existing cable from the panel coming from the ATS and wire it in to the inverter. This allows me to use my generator or shore power and because the inverter itself allows for 50a per leg its great. Then I ran a new cable from the inverter to the ac panel in my trailer. I disconnected my converter that is stock because this inverter is also a charger.
So to recap here's my installation.
Shore power / Generator ----> Automatic Transfer Switch ----> ______________ ----> AC Panel of trailer
|GP-IC-2000-12 |
Battery Bank <-------------------------------------------------> |____________ |