John From Detroit
Well-known member
I have a 2005 Damon Intruder 377W.. THe main (Dining room) slide out is non operational.. We have tested and found no power to the motor.
This suggests a blown fuse or a blown control module
THe bedroom and wardrobe slides are functional however which suggests it might NOT be the fuse (if they are on the same fuse)
On the house fuse panel (Progressive Dynanics) No LED's are lit
HOWEVER when I fed power via an alternate route to the motor I took out a 25 amp and fast. (Possible motor issue, possible blown fuse as well)
Does anyone know where the fuse. or breaker is, and where the control module is. I have been unable to find either.. All the logical spots.. do not contain the control module.
Have also looked at the Intelletec BCC and none of the fuses appear to be for the slide either, will do further testing in the BCC however. (Battery Control Center).
Thanks in advance
This suggests a blown fuse or a blown control module
THe bedroom and wardrobe slides are functional however which suggests it might NOT be the fuse (if they are on the same fuse)
On the house fuse panel (Progressive Dynanics) No LED's are lit
HOWEVER when I fed power via an alternate route to the motor I took out a 25 amp and fast. (Possible motor issue, possible blown fuse as well)
Does anyone know where the fuse. or breaker is, and where the control module is. I have been unable to find either.. All the logical spots.. do not contain the control module.
Have also looked at the Intelletec BCC and none of the fuses appear to be for the slide either, will do further testing in the BCC however. (Battery Control Center).
Thanks in advance
