EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Converting Outside shower to Spray Port  (Read 338 times)


  • ---
  • Posts: 5
Converting Outside shower to Spray Port
« on: July 15, 2017, 09:52:15 PM »
I have a Rockwood Ultralight that I want to covert the outside shower to a Spray port.  I saw this on a new TT at the Dallas show and thought it to be  a neat idea.  We never use the outside shower and i am always needing an extra hose to wash out a cooler or clean the feet.

Does anyone know of a standard sized exterior shower box but with a hose bib on the inside?  Thanks for any help given.
Tom and Lara
Grand Prairie, Texas
2007 Rockwood Model 2607
2007 Ford F-150


  • ---
  • Posts: 3740
  • Following the warm weather!
Re: Converting Outside shower to Spray Port
« Reply #1 on: July 15, 2017, 10:01:18 PM »
I made a simple adapter from CPVC fittings that converts the shower hose 1/2" NPT fitting to a standard garden hose thread. Cost about $1.50 plus the solvent cement that I already had on hand. I use it on the outside shower, and even on the inside shower hose to feed a tank flushing wand.
2001 GBM Landau 34' Class A
F53 Chassis, Triton V10, TST TPMS
2011 Toyota RAV4 4WD/Remco pump
ReadyBrute Elite tow bar/Blue Ox base plate

Rene T

  • Forum Staff
  • ---
  • *
  • Posts: 10682
  • Every day is a payday and every payday I have off
Re: Converting Outside shower to Spray Port
« Reply #2 on: July 16, 2017, 04:54:36 AM »
Lucky for me, I have one of these. My controls have a female quick disconnect built in. One end of the hose has a male QD and the other end has the hose fitting for the sprayer.  Here's the hose and faucet assembly you would need.


« Last Edit: July 16, 2017, 04:56:52 AM by Rene T »
Rene, Lucille & co-pilot Buddy
AKA  Pep N Mem
2011 Chevy Duramax 2500 HD 4X4
2011 Montana High Country 343RL
From the Granite State of NH
& Florida Snowbird in Lakeland FL

John From Detroit

  • ---
  • Posts: 20196
  • ^My New Home^
    • Diabetics Forum
Re: Converting Outside shower to Spray Port
« Reply #3 on: July 16, 2017, 12:55:44 PM »
Something you may not know....
The shower hose is a 1/2 Inch IPT thread.. You can use a standard hose adapter on the faucet end. or in some cases just replace the shower head with a hose adapter.  NO special tools or hardware needed

Or you can replace the entire hose with a 1/2 inch to 1/2 inch flexable hose with a standard garden hose adapter on the other end. THIS may be the best fit for the box.

I occasionaly do that with my outside shower  (Swap the head for the hose adapter_)

Again, Noting special needed.
Nothing adds excitement like something that is none of your business
My Home is where I park it.


Hosted by Over The Network