whitecat75
New member
- Joined
- Jul 17, 2017
- Posts
- 1
Hello,
I have a 1989 Jamboree Rallye by Fleetwood. I purchased it from a gentleman on Craigslist. I can identify both the larger diameter (3" I think) black water waste pipe and the smaller diameter (2" or 1.5") gray water waste pipe. Both are just open holes--missing both the caps and knife valves that the owner's manual says they should have.
When I try to fill the fresh water tank with a hose, the water just issues right out of the vent valve. Just spews right out. Whether it's a trickle or a gush, the water does not fill the tank as it should. No water is issuing from either waste pipe.
I am in a conundrum. Any advice on how to proceed?
I have a 1989 Jamboree Rallye by Fleetwood. I purchased it from a gentleman on Craigslist. I can identify both the larger diameter (3" I think) black water waste pipe and the smaller diameter (2" or 1.5") gray water waste pipe. Both are just open holes--missing both the caps and knife valves that the owner's manual says they should have.
When I try to fill the fresh water tank with a hose, the water just issues right out of the vent valve. Just spews right out. Whether it's a trickle or a gush, the water does not fill the tank as it should. No water is issuing from either waste pipe.
I am in a conundrum. Any advice on how to proceed?