My slide out will not retract completely at the top front corner. About 3/4" in still out compared to the bottom corner. All other corners are fully retracted and sealed. I a have a Lippert slide mechanism. I have downloaded the manual an attempted to make adjustments. I am very mechanical and can usually solve problems like this but this one has me stumped.
The slide moves fairly smooth as it is being retracted. With about 3-5" before fully retracted the slide tilts upward slightly before coming to a stop. Attached are pictures starting with the Top Front showing the gap and then the other 3 corners.
Any advice or help is appreciated.
Thanks,
RJeanes
The slide moves fairly smooth as it is being retracted. With about 3-5" before fully retracted the slide tilts upward slightly before coming to a stop. Attached are pictures starting with the Top Front showing the gap and then the other 3 corners.
Any advice or help is appreciated.
Thanks,
RJeanes
