thomasamski
Well-known member
- Joined
- Dec 21, 2010
- Posts
- 438
Does anyone know the width in mm for the D shaped outside slide gasket. I think it might be 4 mm, but I'm not sure. Thank you.
Slide gasket
- Thread starter thomasamski
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Gary RV_Wizard
Site Team
Presumably on the Southwind in your signature line? Each RV is typically different. Profile may vary too, even within a the basic "D" shape.
4 mm sounds small - that's barely 1/6 of an inch. Slide D-seals are typically 3/4" or 1" tall and 1.0-1.25" wide.
Maybe a photo would help.
Here are some examples:
https://www.rvsupplyparts.com/catalog/rv-slide-out-and-door-seals-616-1.html
4 mm sounds small - that's barely 1/6 of an inch. Slide D-seals are typically 3/4" or 1" tall and 1.0-1.25" wide.
Maybe a photo would help.
Here are some examples:
https://www.rvsupplyparts.com/catalog/rv-slide-out-and-door-seals-616-1.html
OP
OP
thomasamski
Well-known member
- Joined
- Dec 21, 2010
- Posts
- 438
Thank you. That helps a lot.
