old_dutchman
Member
Sure hope someone could show me the way.
After checking the pressure for the airbags I noticed a loose bracket by chance, was right behind the left front head lights. not mounted to anything or had to undo and nuts to remove it. now the kicker I checked the right side, same bracket just sitting there. Then noticed by touching and checking where it would mount the hole headlight assembly was loose like I could pull it right out the front of the RV, didn't try to hard still lots of wires connected but ya get my drift. hope someone has any ideas or heard of this before. We leaving on our first trip August 4th. I found a few places I could tie the front assembly down with tie wire for our trip but that would only be a part time fix. Any help would be a appreciated.
Thx Gerry
After checking the pressure for the airbags I noticed a loose bracket by chance, was right behind the left front head lights. not mounted to anything or had to undo and nuts to remove it. now the kicker I checked the right side, same bracket just sitting there. Then noticed by touching and checking where it would mount the hole headlight assembly was loose like I could pull it right out the front of the RV, didn't try to hard still lots of wires connected but ya get my drift. hope someone has any ideas or heard of this before. We leaving on our first trip August 4th. I found a few places I could tie the front assembly down with tie wire for our trip but that would only be a part time fix. Any help would be a appreciated.
Thx Gerry