elbeau54
Member
Need to take out unit and change the temp sensor and change plugs . Its on a allegro bay 38 tdb. Any tips are appreciated
onan 7500
- Thread starter elbeau54
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Willandgiselarv
Well-known member
Just had mine done and had to be removed from my coach.
It was removed by jacking my coach up in the front and from underneath with a forklift.
There is a middle support underneath the generator that had to be removed.
It was removed by jacking my coach up in the front and from underneath with a forklift.
There is a middle support underneath the generator that had to be removed.
Gary RV_Wizard
Site Team
Plugs? As in "glow plugs", I guess? Is this precautionary, or is there a problem? Glow plugs don't really wear out. The temp sensor does, though (you probably already know that!).
I'd change the generator drive belt while it was out as well. It's probably fine, but it would be a shame to have the belt break and have to pay $$ to have the genset removed again.
I'd change the generator drive belt while it was out as well. It's probably fine, but it would be a shame to have the belt break and have to pay $$ to have the genset removed again.
