Sponsored by Winnebago Industries

Author Topic: High beam lite  (Read 104 times)

Robt

  • Posts: 3
High beam lite
« on: August 16, 2017, 08:22:49 AM »
Have a 2008 Winnebago vectra and when I start the engine the high beam headlight indicator blinks continually. If I turn the wipers on it stops and acts normally. If I turn on the lights it acts normally..
What's up? While blinking the headlights stay off (they don't blink).

John Canfield

  • Forum Staff
  • ---
  • *
  • Posts: 11807
    • Jane and John's Internet Home
Re: High beam lite
« Reply #1 on: August 16, 2017, 08:34:28 AM »
Welcome.

I had strange things going on with turn signals a few years ago. Brake lights worked fine, emergency flashers were okay but turn signals were intermittent. After two tries to fix the problem, Freightliner replaced the control stalk which was the cure. You could possibly have a similar situation but who knows. I would call Freightliner (have your VIN handy) and describe the situation to them. They are really helpful.
--John
2005 Horizon 40AD, 2006 Jeep Rubicon Unlimited
Our Horizon projects
Our weather

 

Hosted by Over The Network