EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: TV Mount  (Read 227 times)

BaylissMason

  • ---
  • Posts: 8
TV Mount
« on: August 21, 2017, 06:04:38 PM »
So I bought a cheap 19" TV and stationary mounting kit for our TT bedroom. There is a sticker on the wall (underneath the cable & power outlets) that says "TV Mounting area". The sales guy told us there was extra material behind that area so that a TV could be mounted safely. So, we grabbed the drill and it went straight through like nothing extra was there. We were too afraid to continue until we had a stud finder. Should we be concerned? Has anyone else mounted a TV (I swear this thing weighs at most 10 pounds)? HELP! We don't want to put the mounting bracket on then have it fall off the wall and ruin the walls and TV. Any and all help is much appreciated.
2018 Coleman Lantern 202RD
2005 Ford F-150 Lariat
VA

grashley

  • ---
  • Posts: 3544
  • Western KY for now.
Re: TV Mount
« Reply #1 on: August 21, 2017, 06:27:19 PM »
Welcome to the Forum!

The stud finder is an excellent idea.  Depending on what you find, options include simply screwing the mount to the wall,  or use molly bolts (expandable behind the wall) to hold the mount.  You may also choose to remove the TV from the mount for travel, and lay it on the bed.
Preacher Gordon
09 Grand Junction 35 TMS - not yet received
2013 F350 Lariat LB SRW Supercab diesel 4X4
Nimrod Series 70 popup (sold)
It's not a dumb question if you do not know the answer.

lynnmor

  • ---
  • Posts: 536
Re: TV Mount
« Reply #2 on: August 21, 2017, 07:51:46 PM »
If it is an outside wall, it may have sheet metal under the paneling.  Check with a strong magnet.  If it is sheet metal, fasten using sheet metal screws.

regval

  • ---
  • Posts: 192
Re: TV Mount
« Reply #3 on: August 22, 2017, 09:23:52 AM »
(deleted)
« Last Edit: August 22, 2017, 11:28:57 AM by regval »
2005 Forest River TT 27BHSS and 2009 Heartland Sundance 2998RB 5vr
2007 Chev Silverado 2500HD WT crew cab, LB, 6.6L, Allison 6sp, B&W Companion Hitch
Retired Biomedical Engineer
Lawrenceville, GA

"Some come to the fountain of knowledge to drink, others just gargle."

Gary RV_Wizard

  • Forum Staff
  • ---
  • *
  • Posts: 60348
  • RVer Emeritus
Re: TV Mount
« Reply #4 on: August 22, 2017, 10:15:52 AM »
RV's often do not have a standard "stud" spacing - they often just put them wherever it is handy or needful. The presence of a window or door really distorts the wall stud locations.

There may well be some extra thickness in the wall to help support of TV and you just missed it. It may not be very large or very thick, and may not be ideally placed either. A stud finder might help, but the magnetic ones probably won't work - they rely on having nails in the studs and RV walls are sometimes primary glued in place.  You can also try tapping the wall and listening carefully for a more solid sound. The ultimate technique is to use a tiny drill (1/16") and drill holes until you find something more sturdy. Don't expect a lot - the "extra" may be as little as 1/4".

I would not use a swing-out mount - odds are the wall won't handle the leveraged weight. Mount it as tight as possible. Placing a support under the lower edge of the tv is often wise, since standard tv mounts are not designed to be bounced by potholes and RR tracks.  You can probably glue a lip to the wall to provide support if there is no extra padding there.

The bottom line is that each RV layout and brand is different and mounting anything takes some thoughtful exploration and often some creativity as well.
Gary
--------------
Gary Brinck
Summers: Black Mountain, NC
Home: Ocala National Forest, FL

HappyWanderer

  • ---
  • Posts: 1519
Re: TV Mount
« Reply #5 on: August 22, 2017, 10:49:24 AM »
You have two existing openings in the wall: the power and antenna outlets. Remove the covers and see if they provide clues as to what's behind the wall.

Triple Slide Jayco

  • ---
  • Posts: 339
Re: TV Mount
« Reply #6 on: August 22, 2017, 02:15:12 PM »
You have two existing openings in the wall: the power and antenna outlets. Remove the covers and see if they provide clues as to what's behind the wall.

Good idea.

As a backup up plan, just in case my TV's decide to fall off the wall or countertop, I cut a piece of the strapping that is used in the ratchet straps we all have that hold down items in trailers -tops of trucks etc. and cut about a 12 inch piece and attached to the wall or ceiling and to the back of the TV (with a small sheet metal screw). Keeps them from being destroyed if they fell.
2016 Jayco TT Triple slide 33RBTS
2016 Chevy Tahoe

 

Hosted by Over The Network