EPDM Coatings
rvupgradestore.com Composet Products PO Box Zone
Over The Network Custom Yacht Interiors

Author Topic: New Toad lighting kit  (Read 177 times)

sgkane

  • ---
  • Posts: 47
New Toad lighting kit
« on: August 29, 2017, 11:08:39 AM »
I'm replacing you toad from a Jeep liberty to a Grand Cherokee. I've used a Blue Ox tow bar so I'll keep that and get a new base plate for the Cherokee. For lights I'm wondering what is a better way to go. Blue Ox recommends adding either a new bulb or LED to the tail light assembly and run the wires forward (which is what I had previously). Roadmaster seems to sell a kit that uses diodes and connects to the existing lights.
Any thoughts on which is a better solutions?
2004 Itasca Horizon 40AD

whokares2

  • ---
  • Posts: 89
Re: New Toad lighting kit
« Reply #1 on: August 30, 2017, 05:49:20 AM »
On my 2017 Patriot, I just went to Harbor Freight (with coupon of course) and bought their magnetic tail lights and ran the wire to a 7 way under the bumper plugging into coach.  This way I didn't mess with new vehicle wiring or lights.
1994 Fleetwood Southwind 30,000 mi.
2017 Jeep Patriot toad
Spencer and Lucky pooches.

phil-t

  • ---
  • Posts: 50
  • Here For The Duration
Re: New Toad lighting kit
« Reply #2 on: August 30, 2017, 06:00:25 AM »
We did the Roadmaster diode kit on our toad.  A 2014 SRX (don't think that makes a difference though).  Works great and carefree.
2010 Winnebago Vista 32K on an F53 Ford V-10 gas chassis.
2014 Cadillac SRX in tow.
CHF, DIY rear TrackBar

John From Detroit

  • ---
  • Posts: 19617
  • ^My New Home^
    • Diabetics Forum
Re: New Toad lighting kit
« Reply #3 on: August 30, 2017, 06:16:17 AM »
I have the "Add-A-Lamp" system on my car. No change to car's wiring. Works great.
Nothing adds excitement like something that is none of your business
My Home is where I park it.

 

Hosted by Over The Network