napatoy
Active member
I've been having an occasional problem..When hooking up to 50a shore power, the circuit breaker that controls the converter blows. I reset the breaker and everything works normally.
I've done some research and one post said that it is possible that more things are connected to the circuit and upon powering up it overloads the circuit.
I know the converter is a WFCO 8700 series on a 2015 Winnebago RLSS 31'
Any help or advice is greatly appreciated
I've done some research and one post said that it is possible that more things are connected to the circuit and upon powering up it overloads the circuit.
I know the converter is a WFCO 8700 series on a 2015 Winnebago RLSS 31'
Any help or advice is greatly appreciated