EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Non-modified sign wave inverter OK for computer?  (Read 266 times)

garyb1st

  • ---
  • Posts: 2135
Non-modified sign wave inverter OK for computer?
« on: September 10, 2017, 01:34:37 PM »
I've read that a pure sign wave inverter isn't necessary for electronics.   Rather it's important when running anything with motors.  If correct, I'm thinking a 600 watt inverter wired directly to the batteries or plugged into a 12 volt receptacle should cover our needs.  For the most part, computing and watching TV.  My computer is a rather spendy IMAC 27 and I don't want to damage it so would appreciate some input with respect to this info. 

FWIW, if I were a younger man looking at 15+ years of RVing, I'd spend the money and buy a real system, solar, batteries and a pure sign wave inverter.  But at 74, I'm thinking I can live with the old fashioned way of charging the house batteries, the Onan 5500 or my Honda 2000i.  If I'm missing the boat and should rethink the issue, please give me your thoughts.  We prefer to boon dock and having some solar is very appealing.  But weight is an issue for us and adding solar and 2 more batteries is problematic.  Traveling light, we're pushing the max GCVWR 26,000 of the motorhome.  We're at 25,600 when towing.   Allison is pretty clear on not exceeding the weight ratings.  Thanks for your thoughts. 
Gary B1st

2005 Pace Arrow 35G
2016 Jeep Wrangler

Tom

  • Administrator
  • ---
  • *
  • Posts: 44742
    • RV Forum web site
Re: Non-modified sign wave inverter OK for computer?
« Reply #1 on: September 10, 2017, 01:48:28 PM »
Gary, we've had only modified sine wave inverters on boats and RVs for 25 years or so. TVs, computers, microwaves, fridges, coffee pots, kettles, phone/camera chargers, sound docks, and (our) other electronics have worked just fine. We don't use electric blankets, but I've read repeatedly that their controls can get fried on a modified sine wave source.
Tom.  Need help? Click the Help button in the toolbar above.

garyb1st

  • ---
  • Posts: 2135
Re: Non-modified sign wave inverter OK for computer?
« Reply #2 on: September 10, 2017, 01:55:54 PM »
Thanks Tom. 
Gary B1st

2005 Pace Arrow 35G
2016 Jeep Wrangler

Lou Schneider

  • Forum Staff
  • ---
  • *
  • Posts: 7418
Re: Non-modified sign wave inverter OK for computer?
« Reply #3 on: September 10, 2017, 02:27:01 PM »
Laser printers don't like modified sine wave.  Everything else should be OK.  Worst case you might get a slight buzz in the sound system or some interference bars through the monitor or TV picture if the sharp corners of the modified waveform make it through the power supply.

garyb1st

  • ---
  • Posts: 2135
Re: Non-modified sign wave inverter OK for computer?
« Reply #4 on: September 10, 2017, 02:55:58 PM »
Lou, thanks for the response.  Pretty sure we can live with the buzzing.  I'll defer to Maria who tells me what's being said as I frequently miss some or the dialogue. 
Gary B1st

2005 Pace Arrow 35G
2016 Jeep Wrangler

ArdraF

  • ---
  • Posts: 9788
Re: Non-modified sign wave inverter OK for computer?
« Reply #5 on: September 10, 2017, 05:53:45 PM »
Gary, you've been in our motorhome and it's modified sine wave.  No pure sine wave in our Monaco.  We run both computers, printer, TVs and such just fine.  I can attest to the electric blanket being problematic.  We had a couple that failed until we put the proverbial 2 + 2 together and discovered we needed pure sine wave for them.  We replaced those with a mattress warmer that works just fine on our modified sine wave.

ArdraF
ArdraF
:D :D

garyb1st

  • ---
  • Posts: 2135
Re: Non-modified sign wave inverter OK for computer?
« Reply #6 on: September 10, 2017, 06:00:03 PM »
Thanks Ardra.  Been a while.  Hope you and Jerry are well.

Gary
Gary B1st

2005 Pace Arrow 35G
2016 Jeep Wrangler

ArdraF

  • ---
  • Posts: 9788
Re: Non-modified sign wave inverter OK for computer?
« Reply #7 on: September 10, 2017, 06:26:59 PM »
We are, thanks!  And you two as well.

ArdraF
ArdraF
:D :D

John From Detroit

  • ---
  • Posts: 19806
  • ^My New Home^
    • Diabetics Forum
Re: Non-modified sign wave inverter OK for computer?
« Reply #8 on: September 11, 2017, 07:19:41 AM »
I have run laptops on MSW and PSW. and of course "Shore" (Mains) power.

On MSW some of the power bricks get a tad warm but not dangerously so. At least not the ones I had. THey did get "Uncomfortable" however .  That is the only thing I'd worry about   How hot the brick gets.
Nothing adds excitement like something that is none of your business
My Home is where I park it.

 

Hosted by Over The Network