Pocahontasx3
New member
- Joined
- May 14, 2017
- Posts
- 2
So long story short I need help figuring out what wires go where. I have a fleetwood bounder 1994. I had someone help me trouble shoot some issues I had with my hot water switch not working. It is mounted in the kitchen and both the hot water tank and water pump were hooked up. This person disconnected all eight wires so I can get a new switch and they didn't label anything and so now I have eight different wires and not a clue how to put them back. Can I assume the different color red wires on the pump switch in the bathroom are the same as the ones in the kitchen? If so I can put the water pump back but then that would leave the hot water part of it.
I have a grey wire, black with white stripe,2 white with red stripe, 2 reds, red with yellow stripe, red with green stripe... help!!! Which ones are for the switches and which ones are for the lights?
I have a grey wire, black with white stripe,2 white with red stripe, 2 reds, red with yellow stripe, red with green stripe... help!!! Which ones are for the switches and which ones are for the lights?