EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: 1994 Monaco Dynasty Power Steering Belt  (Read 162 times)

Undertaker66

  • Posts: 2
1994 Monaco Dynasty Power Steering Belt
« on: September 29, 2017, 05:39:12 PM »
I need to change the power steering belt on my Dynasty and there are no numbers on it. It appears to be what i would call it as a radius tooth transmission belt. Does anyone have a part number? I would say it measures about 200 mm give or take. Thanks! kevin

Undertaker66

  • Posts: 2
Re: 1994 Monaco Dynasty Power Steering Belt
« Reply #1 on: September 29, 2017, 05:40:57 PM »
It's the cummins 5.9 ISB engine.

Alfa38User

  • ---
  • Posts: 5945
Re: 1994 Monaco Dynasty Power Steering Belt
« Reply #2 on: September 30, 2017, 08:07:32 AM »
Take it into a big auto parts supplier, they can usually find a replacement in their multitude of catalogs.
Stu
Montréal, Canada 🍁
Snowbird, Naples Florida
Alfa Gold 38 (2000) 5ver (parked!)

"Of course I talk to myself, sometimes I need expert advise!!!"

Gary RV_Wizard

  • Forum Staff
  • ---
  • *
  • Posts: 61046
  • RVer Emeritus
Re: 1994 Monaco Dynasty Power Steering Belt
« Reply #3 on: September 30, 2017, 09:18:26 AM »
The engine has little to do with what a/c drive belts is used - the a/c compressor is an add-on accessory installed by the chassis builder and that determines what belt size & type is needed.  Just take the belt to a competent auto parts store and ask them to match it up.  I would suggest a NAPA or Carquest rather than Autozone or Advance - the counter clerk is much more likely to be a full-time and experienced parts professional.
Gary
--------------
Gary Brinck
Summers: Black Mountain, NC
Home: Ocala National Forest, FL

 

Hosted by Over The Network