rvupgradestore.com Composet Products
RV Life Magazine RV Park Reviews RV Trip Wizard

Author Topic: Seat belt bar on 2003 Roadtrek 170 Popular  (Read 430 times)

BCrJO1

  • Posts: 2
Seat belt bar on 2003 Roadtrek 170 Popular
« on: September 30, 2017, 04:27:28 PM »
We want to convert our Roadtrek to allow loading a mobility vehicle in the back. We took out the bed but there is a VERY sturdy L-bracket going across the door. I want to remove it. Anyone with experience doing that?

nibroc

  • ---
  • Posts: 106
Re: Seat belt bar on 2003 Roadtrek 170 Popular
« Reply #1 on: November 17, 2017, 05:31:05 PM »
sorry ya haven't gotten any help on this

HitNtheroad

  • ---
  • Posts: 27
Re: Seat belt bar on 2003 Roadtrek 170 Popular
« Reply #2 on: January 13, 2018, 02:01:02 PM »
Not sure if I had the same type set up as you but I recently removed all the seatbelt bars from my motorhome to do a remodel. The large bracket under the dinette bench seat was bolted to the floor w/ 8 bolts. The bolts went all the way through the floor to the underneath of the motorhome. It took a lot of elbow grease, liquid wrench, and some tears but I finally got them loose. I filled the holes with some heavy duty sealant. Good luck. 
Steph & Mak
2007 Four Winds 5000 28A
Class C motorhome.
2009 Toyota RAV4
2 Pescador Pro 12' Kayaks
Newbie owner/operator