mrdave1017
New member
- Joined
- Oct 4, 2017
- Posts
- 1
2005 Vintage Dutchmen TT. Want to add Xantrex Freedom Xi 2K Inverter. TT has WF 8955 Converter/Charger. Upgrading single battery to battery bank of 4, 6 Volt AGM Deep Cycle hooked series/parallel. Inverter has automatic A/C transfer (shore pass through to Internal A/C out). Problem: How do i use this with the WF 8955 converter/charger. Do I run shore power up stream of the 30 Amp breaker in the WF 8955 to the Invert first? Do I then run ac out of the inverter to what would have been the shore power IN (30 Amp Main breaker) in the WF 8955 distribution panel? If I do that I'll need to add an external 30 Amp breaker in it's own box up stream of the Xantrex INVERTER where the shore power comes into the TT to have a cut off of the shore power. Is there any way of getting around having to install an external (from the distribution panel) 30 Amp breaker?
Will this work this way? It seems like the battery charger in WF 8955 needs to be taken out of the circuit somehow when it is being fed by the INVERTER. Surely this can't be hard to do. Any suggestions or help is appreciated.
Thanks,
Mrdave1017
Will this work this way? It seems like the battery charger in WF 8955 needs to be taken out of the circuit somehow when it is being fed by the INVERTER. Surely this can't be hard to do. Any suggestions or help is appreciated.
Thanks,
Mrdave1017