Power Gear Levelers In Error Mode

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

wincom6

Well-known member
Joined
Dec 10, 2009
Posts
312
Location
Robinson Township,Pittsburgh, PA
I?m having problems with my Power Gear Electric Leveling System, the levelers were working fine until I changed my chassis batteries. Now they go into error mode and when I reset some on the lights come on but they will not work. I followed all the information in the Power Gear Guide and have done every thing short of applying 12 volt to the individual motors.  Is there something you could suggest?
 
Have you tried removing the key pad and disconnecting the wires for 1-10 minutes and re-connecting ?
 
Sorry not to answer you but I have not been on the site. I got all 4 up by disconnecting the power plug at each leveler and powering it with 12 volts from my car. I?m taking it to Fleetwood at the end of the month and  have them check it  out. If I did not have them up already I would try your suggestion.  I have them up I?m going to leave well enough along. Thanks for getting back to me.
 
Back
Top Bottom