Where is the limit switch for the bed ?

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
P

Peteyboy

Guest
The fold up bed is not folding up enough and consequently the slide won't come in until I push on the bed a few times.  Anyone know where the switch usually is that allows the slide to retract ?
 
I know where mine are - in the trash.  I just bypassed them.  At the PDI one broke and fell in pieces under the bed and it took a month to get fixed under their scum system of warranty, so the next time it happened I just bypassed both of them.  Its not like there aren't other things I also have to remember before bringing in the slide, I don't need an interlock to verify me :)

So I didn't answer your question and I'm sorry, but I honestly don't know.  When they broke, they just laid down under the bed with yellow wires dangling.  I assume they go on the track somewhere (which is also a Lippert product).  Who would have guessed the only thing that has given me any grief are the 3 Lippert systems.
 
Thanks Brad,,,, I think I'll squeeze under there and start looking around.
 
I don't have one on mine the automation system pops up a box if the bed is retracted.
I would guess that there are if it doesn't work.
 
Back
Top Bottom