EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Winnebago 2015 Vista, inside lights  (Read 172 times)

slowrider

  • Posts: 4
Winnebago 2015 Vista, inside lights
« on: November 06, 2017, 09:16:57 AM »
The inside lights on 2015 Winn Vista have only 2 wall switches that control 2 lights.  All the test of the ceiling lights are turned on at each light with a button on the light.  My question is does anyone have an "easy" way to connect some of these lights to a wall mounted light switch?  How hard is it to run wire from a ceiling light to a new wall switch?

AStravelers

  • ---
  • Posts: 674
  • Part time travelers, 4-8 months each year.
Re: Winnebago 2015 Vista, inside lights
« Reply #1 on: November 06, 2017, 05:37:18 PM »
Very, very hard to run the wire inside the ceiling and walls.
Al & Sharon
2006 Winnebago Sightseer 29R
2009 Chevy Colorado 4X4

http://downtheroadaroundthebend.blogspot.com/

OLDRACER

  • ---
  • Posts: 979
Re: Winnebago 2015 Vista, inside lights
« Reply #2 on: November 09, 2017, 06:01:38 PM »
In my 2012 Vista same problem. Solved for me by replacing awkward button on fixture with a pull cord operated switch, easy fix, a lot more convenient, especially the one over the dining tale which was a PIA, only one side of the seating could reach the button. Cords, not chains, which are too noisy under motion.

By the way, it was a sloppy install from the factory, screws just barely in some wood, likely would've come own on it's own eventually.

 

Hosted by Over The Network