Boonieman
Well-known member
We had a pole barn built last year and I installed an RV panel like you would find at a typical RV campground, it has a 30 amp, a 50 amp, and a 120v GFCI receptacle that were pre-wired on the panel. Each receptacle has its own breaker/breakers for each receptacle. We we considering having some friends down to camp this coming year. Can we plug both units into this panel at the same time, one of us using the 50 amp and the other using the 30 amps receptacles? The RV panel is being supplied from a 200 amp main panel inside the building via 80 amp double-pole breakers with a 50 foot run of #4 wire. I think it will be ok, but I wanted to hear if from folks with a lot more experience than me. Thanks!