EPDM Coatings
rvupgradestore.com Composet Products Custom Yacht Interiors

Author Topic: Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer  (Read 136 times)

yoanie

  • ---
  • Posts: 7
Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer
« on: December 26, 2017, 10:48:41 AM »
Hello,

Thank you all again for your advice on my missing converter!  A wealth of information here on this board!

Does anyone have a suggestion for what type of converter we should get for a small travel trailer?

Thank you,

Yoanie


kdbgoat

  • ---
  • Posts: 4376
Re: Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer
« Reply #2 on: December 26, 2017, 11:21:18 AM »
Or shop around here:

http://www.bestconverter.com/

They will gladly answer any questions you have about converters, and make solid recommendations, not just sell you anything that will "fit in the hole".
I know you believe you understand what you think I said,
But I am not sure you realize what you heard is not what I meant


2016 Leprechaun 319DS

QZ

  • ---
  • Posts: 391
Re: Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer
« Reply #3 on: December 26, 2017, 11:34:52 AM »
Progressive dynamics is good. Some people have good luck with them but I wouldn't buy wfco. You want something like the PD that will go to 14.4 volts and make any generator run time more efficient if you dry camp etc. If you talk to Randy at Best have your model number as some of the PD kits will have a fuse panel upgrade included if you need it.
« Last Edit: December 26, 2017, 11:36:30 AM by QZ »

yoanie

  • ---
  • Posts: 7
Re: Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer
« Reply #4 on: December 26, 2017, 02:18:18 PM »
Thank you all for your input!!  I really appreciate it!

Lou Schneider

  • Forum Staff
  • ---
  • *
  • Posts: 7539
Re: Best Replacement Converter for 2004 Pioneer 19t4 Travel Trailer
« Reply #5 on: December 26, 2017, 03:45:38 PM »
Since your power center doesn't include space for the converter, there isn't a "hole" for a retrofit style converter to fit into.  You'll want a stand-alone model to put outside the power center, not one made to go inside it.

The Progressive Industries 9500 series is great, I also wouldn't go with a WFCO.

If the area where the existing converter wires go to isn't convenient, another option is to ignore the taped off wires (take them out) and mount the converter closer to the batteries, connecting it directly to the battery terminals.
« Last Edit: December 26, 2017, 03:53:35 PM by Lou Schneider »

 

Hosted by Over The Network