I've sent the last 4 hours trying to figure this out....any help would be greatly appreciated.
When I pulled the above furnace out about 3 months ago I cut the wires off leaving wire connectors attached to the furnace wires.
Black + to Red
White - to Yellow
Blue (with no markings) to the W wire from the thermostat.
There is nothing to connect to the Blue ++++ that is on the switched leg.
It is possible that I pulled something out but I cannot find any other wires from the thermostat.
What else would the Blue ++++ connect to?
Everything was running before but the trailer is used so things could have been changed around before.
Here's a link to the manual
http://tnt.rvia.org/unipop.cfm?v=3&oid=1483
Wiring diagram is Fig.25 on Pg.35
Thank You.
When I pulled the above furnace out about 3 months ago I cut the wires off leaving wire connectors attached to the furnace wires.
Black + to Red
White - to Yellow
Blue (with no markings) to the W wire from the thermostat.
There is nothing to connect to the Blue ++++ that is on the switched leg.
It is possible that I pulled something out but I cannot find any other wires from the thermostat.
What else would the Blue ++++ connect to?
Everything was running before but the trailer is used so things could have been changed around before.
Here's a link to the manual
http://tnt.rvia.org/unipop.cfm?v=3&oid=1483
Wiring diagram is Fig.25 on Pg.35
Thank You.