Heli_av8tor
Well-known member
Genny had been running for about 10 minutes when it died. It will run on restarts until the start switch is released.
Checked oil level - OK
Error code blinks: 27
There is a 20 and 30 amp breaker on the genny. Neither were tripped.
However, if I turn off the 30 amp breaker it will start and run. It dies if I flip it on. I turned off the main breaker at the AC panel with no change.
Any ideas?
Tom
Checked oil level - OK
Error code blinks: 27
There is a 20 and 30 amp breaker on the genny. Neither were tripped.
However, if I turn off the 30 amp breaker it will start and run. It dies if I flip it on. I turned off the main breaker at the AC panel with no change.
Any ideas?
Tom