Rv refrigerator

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
H

HeathMcquinn3095

Member
Joined
Jul 23, 2017
Posts
14
My refrigerator works great on electric but when I use LPG it will start and then go out after a few minutes.  It is flashing error code F1.  Any ideas what this could be?  It is a norcold.  Everything else works great on gas.  Any help is appreciated
 
What model Norcold?

I suspect that code is FL rather than F1 - probably meaning No Flame (the burner went out). You already knew that, of course, so the problem is Why did the flame go out?  Could be anything from  spider or mud dauber nests in the burner area (a prime suspect), crap clogging the LP line somewhere, faulty LP regulator, low on LP.

You can get a free service manual for your specific model Norcold at Bryant Manuals
 
X2 the burner cleaning and the burner orifice. The hole may appear tiny but spiders can get in there a block it.
 
Might be a dirty flame sensor also. I normally blow out my burner area with a air hose about once per year and it is stored in a very clean building. So far, it has never failed.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 1,111 (members: 25, guests: 1,086)

Forum statistics

Threads
131,933
Posts
1,387,742
Members
137,684
Latest member
kstoybox
Back
Top Bottom