We have a manufacturer installed bay heater in the water compartment in our 2014 HR Ambassador. We toggle a switch to activate it but the indicator that it is actually heating never comes on. The default is around 45F and this morning it was 38 but no light or heat. We can?t find a fuse. Is there one? Our rv is a 40 PDQ. Any suggestions?
Bay heater on Holiday Rambler (OEM)
- Thread starter donandlin
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
dkreuzen
Well-known member
My instructions state:
"When the bay temperature reaches 40? F. (+/- 6? F.) the snap disc thermostat closes."
So 38? may not trip the heat to come on. If it was below 34? then I would start looking for a problem.
"When the bay temperature reaches 40? F. (+/- 6? F.) the snap disc thermostat closes."
So 38? may not trip the heat to come on. If it was below 34? then I would start looking for a problem.
billwild
Well-known member
- Joined
- Dec 8, 2009
- Posts
- 882
We had an '05 Rambler PDQ with the compartment heater and it worked well. I do believe 34 degrees was the temperature it turned on at.
Bill
Bill
Latest posts
-
-
Help identifying Solar charging jacks on power station
- Latest: John From Detroit
-
-
-
-
-
-
-
-