Have a tiresafeguard tire monitor system and need to change the batteries in the button type senders. The sensor has two small phillips screws in the side of the cap that I think needs to be screwed or pulled off to get to the battery. How do I get the cap off? Thanks
Tiresafeguard tps battery change
- Thread starter Robt
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
8Muddypaws
Well-known member
Senders are a pretty generic item. I have an EEZRV system with senders as you describe.
Once you remove the two screws the cap may pop off on it's own. If it doesn't a little prying with a sharp edge might do the trick. Try to stay away from the o-ring sealing surface - pry near where the screws were.
When I change my batteries I use a dab of silicone pool lube on the o-rings. Before I started doing that I had water get into the battery of one of my senders.
Once you remove the two screws the cap may pop off on it's own. If it doesn't a little prying with a sharp edge might do the trick. Try to stay away from the o-ring sealing surface - pry near where the screws were.
When I change my batteries I use a dab of silicone pool lube on the o-rings. Before I started doing that I had water get into the battery of one of my senders.
Latest posts
-
-
-
-
1998 Newmar Moutain Aire/Freightliner Fred (MC) Chassis Fuel Tank- Latest: Clyde 'Buck' Grimes
-
-
-
-
-
