rvupgradestore.com Composet Products
RV Life Magazine RV Park Reviews RV Trip Wizard

Author Topic: Old Rig with Radiused Hatches  (Read 331 times)

DearMissMermaid

  • ---
  • Posts: 2381
  • Read my mis-adventures at DearMissMermaid.Com
    • DearMissMermaid.Com
Old Rig with Radiused Hatches
« on: March 07, 2018, 05:28:48 AM »
My 1992 Holiday Rambler Imperial 5th Wheel, 36 feet, came with four opening hatches with fans with broken blades save for one.

I searched all over creation in person and online for weeks for the fan blade replacements as all motors work.  Even contacted original company which has been bought and sold several times and no longer makes the motors or the blades.

The only one that works in the bathroom seems pretty ineffective.

I had a Fantastic Vent with remote in the motorhome I sold. Would love to put one or two of those in the rig, well 4 if I could afford it but there is a huge problem.

The roof over the bed where one hatch lives is flat, other 3 are on a slope.

Roof to ceiling is very thick due to AC ducting and padded vinyl ceiling.

At some point someone put Max Air covers over all hatches because the new hatch covers are frighteningly expensive from a retro vintage company.

Anyhow... Fantastic Vent is square and my hatches have radiused corners.

Roof is aluminum.

Is there any workaround this situation?

Great air flow without extreme expense?

See pic of current hatch design.
http://DearMissMermaid.Com

Living, working. playing  in a 1992 Holiday Rambler Imperial 36' 5th Estate, formerly 8 years 24/7 in a Class C, 1994 Tioga Montara, 28'

Pack half the stuff and twice the cash.
http://dearmissmermaid.blogspot.com/

kdbgoat

  • ---
  • Posts: 5475
Re: Old Rig with Radiused Hatches
« Reply #1 on: March 07, 2018, 05:57:45 AM »
Would the link below be of any help for getting new fan blades? I realize these are aluminum and not plastic, but that shouldn't make a difference.

https://www.mcmaster.com/#fans/=1bv5jxd
« Last Edit: March 07, 2018, 05:59:31 AM by kdbgoat »
I know you believe you understand what you think I said,
But I am not sure you realize what you heard is not what I meant


2016 Leprechaun 319DS

Lou Schneider

  • Forum Staff
  • ---
  • *
  • Posts: 8257
Re: Old Rig with Radiused Hatches
« Reply #2 on: March 07, 2018, 06:32:44 AM »
What are the dimensions of the existing hatches?  If they're close to 14" square, I'd remove them, enlarge the openings to that size and install Fantastic Fans.

You may just have radius cut wood at the corners - if so, it should be fairly easy to make the corners square.  Pop off the interior trim and take a look - there should be screws under those 4 caps.
« Last Edit: March 07, 2018, 06:42:53 AM by Lou Schneider »

John From Detroit

  • ---
  • Posts: 21049
  • ^My New Home^
    • Diabetics Forum
Re: Old Rig with Radiused Hatches
« Reply #3 on: March 07, 2018, 07:16:45 AM »
The standard roof vent and the fantastic fan both take the same size hole.

I would guess that the standard fan blade from most any modern fan will fit, Not 100% sure though try ONE first.

I replaced the inerffective vents with 4 large "Computer" type fans in each of the two roof vents I have, Much more air flow.
Nothing adds excitement like something that is none of your business
My Home is where I park it.

Sun2Retire

  • Photo moderator
  • ---
  • *
  • Posts: 3421
Re: Old Rig with Radiused Hatches
« Reply #4 on: March 07, 2018, 08:57:19 AM »
I'm thinking kdbgoat and John might have something. Rather than attempt a Fantastic Fan conversion, look into replacing the current fan with a new motor and blades that are much larger (closer to the size of the opening). Likely to be much, much cheaper than a FF, and could be as simple as removing the old motor and installing new. You'd have to pay attention to fan diameter as well as blade thickness (i.e., the vertical room required for blades and motor) but I'll bet there's a million places to buy such things. You could probably even find some that would accept a speed control knob that you could install either at the existing switch or up at the fan. I wouldn't just put new blades on the exisiting motor as I think there's a potential for overheating the motor with a higher than design load.

The end result may not have the features of the highest end FF (remote control, motorized cover, temp and rain sensor, etc) but it could accomplish your stated goal of great airflow without extreme expense.
Scott
Fulltiming in a 2005 Newmar Dutch Star 3810, Spartan, Cat C7 350
Eezrv TPMS, 970W Solar, Tri-Metric Battery monitor
2002 Dodge RAM 1500 Quad Cab toad
Stowmaster towbar & Brakemaster toad braking system