rvupgradestore.com Composet Products Fridge Defend
RV Life Magazine RV Park Reviews RV Trip Wizard

Author Topic: Floor Vent Covers  (Read 580 times)

Mick & Pat

  • ---
  • Posts: 293
    • Thiswilldous
Floor Vent Covers
« on: February 09, 2018, 04:05:03 AM »
Hi Guy's its the two Brits from sunny but cool Spain again.

Been some time since last posting and there has been a major change.

We have owned and lived full time in our 2005 Fleetwood Discovery A class for 10 years & 4 months and have just exchanged her for a 2018 Keystone Alpine 3500 RL 5th wheeler.

It's become a new learning curve and I have and no doubt will have a few questions that as usual YOU EXPERTS may be able to help with?

So here goes with with the first problem, the 5th wheeler has several floor vents which being in areas heavily walked on appear to be quite susceptible to damage as well a good dirt trap so I tried a Google search for RV floor vent covers but without success, can any of you guys help with either a link to 'covers' or any idea to prevent dirt going in or damage?

Regards Mick & Pat Podmore.

UK couple who toured USA / Canada. Oct 2007 - Aug 2009

2005 Fleetwood Discovery 39S,Cat C7, Freightliner XC Chassis  2008 Jeep Liberty Ltd 3.7 .

Jim Godward

  • ---
  • Posts: 5841
Re: Floor Vent Covers
« Reply #1 on: February 09, 2018, 04:33:51 AM »
We found filters that went into the vents at the local hardware store and also at both LOWE's and Home Depot so you should be able to find something similar over there.

Good Luck,
Jim & Pat Godward
Hillsboro, Oregon

John From Detroit

  • ---
  • Posts: 21886
  • ^My New Home^
    • Diabetics Forum
Re: Floor Vent Covers
« Reply #2 on: February 09, 2018, 07:26:05 AM »
Though the filters help with the crud... They don't stop the damage.. i've not seen vent covers save in some mail order specality houses from time to time.. you' likely have to make them.
Nothing adds excitement like something that is none of your business
My Home is where I park it.


  • ---
  • Posts: 881
Re: Floor Vent Covers
« Reply #3 on: February 09, 2018, 10:11:25 AM »
Go to local BIG hardware store.  Take a vent in with you.  Go down HVAC vent isle.  Look at simple to cut mesh or material to go inside to reduce dirt.  Very thin material, you don't really want to filter / reduce air flow.  Also look at cost to replace vent if nasty ($10 usd) or buy a can of spray paint,


  • ---
  • Posts: 5413
  • Western KY for now.
Re: Floor Vent Covers
« Reply #4 on: February 09, 2018, 08:32:52 PM »
If you are using the furnace and these vents, I would skip the filters which will block air flow, and pull them to vacuum out the "stuff" every couple months.  Being floor vents, they should be made to withstand foot traffic.  As Spencer said, replacements should be easy to find and inexpensive to replace when needed.
Preacher Gordon, DW Debbie
09 Grand Junction 35 TMS  Progressive HW50C
Andersen Ultimate hitch
2013 F350 Lariat LB SRW Supercab diesel 4X4   TST TMS  Garmin 760
Nimrod Series 70 popup (sold)
It's not a dumb question if you do not know the answer.


  • ---
  • Posts: 590
  • Wanna buy a truck?
Re: Floor Vent Covers
« Reply #5 on: February 10, 2018, 03:01:30 AM »
We got metal vents from Amazon.  You can close them off,which would lessen the dirt.
2006 Dutchmen Denali 29 RL fiver
2006 Dodge 2500 Big Horn
2001 GMC Sierra 3500


  • Guest
Re: Floor Vent Covers
« Reply #6 on: February 10, 2018, 06:44:55 AM »
Assuming they are metal registers. I made some covers for my floor vents. I just used some of the vinyl flooring that is used in the trailer (got a sample from the trailer mfr) and some self-adhesive magnetic sheets to stick to the underside of the flooring pieces. I cut those magnetic sheets to the same dimension as each register and cut the flooring samples larger than the register so they overlap the register in all directions. I did a pretty good job of matching the grain of the covers to the grain of the flooring and so they are barely noticeable on the floor.


  • ---
  • Posts: 812
  • Maddog & 'Sunny'
Re: Floor Vent Covers
« Reply #7 on: February 12, 2018, 10:16:43 AM »
Hammster -- very nice.  You get an AAA+++++.  I practiced with some old magnetic signs and 'woodgrain' sticky shelf liner.  Did well enough to keep the dog hair outta the vents and they are out of the way so haven't worn too much in 10 years.   JM2
Pam (a.k.a.-Maddog  (driver))
Kate (a.k.a.-One Eyed Old Lady {nagivator))
2 furry copilots ('Charlie' 15# Terrier/X &  'Bella' 10# Min.Schnauzer/X'

2007 Itasca 'Sunova' 26P ~ 2003 Rav4 'toad'(remco tranny pump)