GrumpyOldGoat
New member
- Joined
- Mar 11, 2018
- Posts
- 4
2006 Forest River Sandpiper.
38" two slides, 2 AC and a water heater that spews out the top starting yesterday.
SW10DE SUBURBAN 10 GALLON WATER HEATER.
Since the lines go in on the end, the pressure valve, drain/anode are all on the outer end, I assume a hole has appeared where there should be no hole.
I'm crowding 71 pretty hard, tired and want the simplest and cheapest solution.
Replace with---
Used for $400 +/-
New $590 +/- and up,
or
on demand? cost unknown.
IF the hole on the top is a split from possible freezing at some point in it's Pre-ME days could it be welded?
38" two slides, 2 AC and a water heater that spews out the top starting yesterday.
SW10DE SUBURBAN 10 GALLON WATER HEATER.
Since the lines go in on the end, the pressure valve, drain/anode are all on the outer end, I assume a hole has appeared where there should be no hole.
I'm crowding 71 pretty hard, tired and want the simplest and cheapest solution.
Replace with---
Used for $400 +/-
New $590 +/- and up,
or
on demand? cost unknown.
IF the hole on the top is a split from possible freezing at some point in it's Pre-ME days could it be welded?