penman39
Well-known member
I noticed one of my clearance lights was out while doing my Spring maintenance. Removed the two screws and attempted to pop off the amber lens to replace the 194 bayonet bulb but no luck. Found out after breaking a tab on the lens assembly that you need to rotate the bulb socket 90? to remove the light. The problem there is that Winnebago did not leave enough wire length to pull out the lens assembly to allow it to rotate. The bulb was changed but I was not able to re-attach the bulb socket to the lens assembly. Poor design/to much insulfoam used. Just a heads up for anyone who has a clearance bulb burnt out.