BinaryBob
Moderator Emeritus
My 12 X 12 pizza stone arrived thanks to Scott's (Sun2Retire) recommendation in an older thread. With an oven thermometer, my temp is holding steady at 50 degrees too cool.
A search on knob adjustment shows some type of adjustment screw, but no specifics on where this is located. Pulling the knob off, I see two screws at 3 and 9 o'clock that hold the controller, but no adjustment screw. This is an Atwood oven.
Can anyone point me to where this elusive adjustment screw is?
Thanks
A search on knob adjustment shows some type of adjustment screw, but no specifics on where this is located. Pulling the knob off, I see two screws at 3 and 9 o'clock that hold the controller, but no adjustment screw. This is an Atwood oven.
Can anyone point me to where this elusive adjustment screw is?
Thanks