Metalman RVer
Well-known member
- Joined
- Dec 3, 2016
- Posts
- 156
I decided to de-winterize our new to us 5th wheel Glendale Titanium today, this being the first time for getting things going for me since owning this unit & the 12v water pump wants to keep running on after building pressure. I dont think it has freeze damage as I dissconnected the lines running to it (inlet & outlet) after putting air through the system last fall. Purged the air from the HWT tank today by opening the pressure relief valve till water came out there. Purged air from all taps, shower, outdoor shower, toilet etc so dont believe that there is air pockets in the system. The pump is slow to kick in & then when it does it builds good pressure & then after pressure builds it does not shut down completly, just humms quietly but will not cycle off.
No visible leaks anywhere in the system.
Any ideas?
I did buy a spare pump, just to have, so can switch it out if need be.
No visible leaks anywhere in the system.
Any ideas?
I did buy a spare pump, just to have, so can switch it out if need be.