Lippert Level-up failure

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
M

meternerd

Well-known member
Joined
Mar 30, 2012
Posts
158
Probably been covered many times, but I'll add my 2 cents.  During the de-winterizing of my 2013 Montana, I tried to use the Lippert Level-up to raise the axles to check the tires and wheel bearings. The touch pad did nothing.  No display, no nothing.  Checked power and it was fine.  Turns out that the touch pad buttons were not making contact.  If I pushed 'em with my fingernail, it worked as usual.  I'd say their circuit board could use an update.  I have a new one on order for $255.  At least I got the legs to finally extend and retract.  Hopefully they have addressed this problem in the new circuit boards.
 
Turns out it was the touch pad.  Could have been because of the sub-zero temps we had last winter, but the new panel fixed it.  I'll probably remove the panel when I park it for the winter to avoid the same failure next year.  I did notice that the replacement was different as far as screen layout and buttons, so hopefully they redesigned it to prevent it from happening again.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 546 (members: 7, guests: 539)

Forum statistics

Threads
131,954
Posts
1,388,152
Members
137,708
Latest member
7mark7
Back
Top Bottom