Our power control board only lights up 50 amp even though it is only plugged into a 20 amp outlet

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
T

tracemyirishroots

Member
Joined
Jun 30, 2017
Posts
9
Our power control board only lights up 50 amp even though it is only plugged into a 20 amp outlet. It used to be able to switch manually between 20, 30, 50 and gen. This is on a Winnebago Sightseer.
 
tracemyirishroots said:
Our power control board only lights up 50 amp even though it is only plugged into a 20 amp outlet. It used to be able to switch manually between 20, 30, 50 and gen. This is on a Winnebago Sightseer.
Click to expand...
What make, model and year is your RV?
 
There are a couple possibilities, but I would start by resetting the Powerline EMS by removing all 12v power from it for 15-20 seconds. In most coaches, turning the Battery Disconnect off will do that, but in some you have to actually disconnect the 12v wire (or fuse) that powers the EMS.

Please tell us what year/make/model you have.
 
2017 Winnebago Sightseer. Took it camping and home now and plugged in, and guess what, it shows the 20 amp. I have no idea what is going on with it. Only problem we had was the water heater, didn't want to heat on electric, had to use the propane.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 672 (members: 24, guests: 648)

Forum statistics

Threads
131,964
Posts
1,388,319
Members
137,718
Latest member
urnwholesaler
Back
Top Bottom