King Dome Satellite system

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.

cherhager

New member
Joined
May 10, 2018
Posts
1
We are new to RVing and are trying to hook up our TV.  We have a King Dome automatic satellite system which has one coax output and our receiver requires two inputs.  What do we do?
 
Have you tried using a splitter by taking the output of the KingDome and splitting it into two? Use 2 short pieces of coax just behind the receiver and it may work for you.... It did for me at one point but I did not have a KingDome, just an open faced dish. I later changed out the single LNB for a double.
 
What receiver?  On my old Directv receiver one was marked for a single coax.
 
Look at the receiver carefully.  My DTV box has 3 coax  connections - TO SAT,    TO TV    ANT IN
My older DVR required to coax to the sat in order to watch one show and record another.  With only one connected it worked fine done either, but not both.
 
Back
Top Bottom