_Rusty_
Well-known member
We discovered a leak in the grey water piping on our first outing. (see attached) My question is, will PVC pipe glue to the black plastic Valterra valve interface? My plumbing supply house says ABS hasn't been carried by them for years and they don't think the Valterra valve is ABS but plastic.
Another option is to place a rubber sleeve (with hose clamps) between the valve and the new pipe, but given the small space this will cut into my storage quite a bit. I also think I will turn the first corner with a wye or tee and provide a cleanout access point in case the tank gets plugged with something.
Any thoughts or suggestions?
Another option is to place a rubber sleeve (with hose clamps) between the valve and the new pipe, but given the small space this will cut into my storage quite a bit. I also think I will turn the first corner with a wye or tee and provide a cleanout access point in case the tank gets plugged with something.
Any thoughts or suggestions?