Where to crank in slides

The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
See posts with no answers
S

Shearman59

New member
Joined
Jun 16, 2018
Posts
1
We have a 2001 National RV Seabreeze....we do not have an owners manual.
12 volt system is not working. Need to manually pull slides in. Have watched many videos, we can?t locate where to crank in slides.

Can anyone help?

Thanks!!
 
It probably has a Power Gear slide system. If so, you look in the trailer, under the slide, to see where the motor engages the drive gear that moves the slide. There will be a lever that unlocks the motor so it can turn freely - just flip it. Then you put a big wrench (preferable a ratchet type) on the end of the gear shaft and start cranking. It's slow but it works.
 
The instructions he gave are good PROVIDED the manual crank in nut (3/4 inch by the way) was installed.. Mine was not Had to use a PIPE WRENCH on the square shaft.

Finally got it working again .
 
You must log in or register to reply here.

Latest posts

Members online

Total: 656 (members: 33, guests: 623)

Forum statistics

Threads
131,914
Posts
1,387,295
Members
137,666
Latest member
nativoacai
Back
Top Bottom