Kaputnick
Active member
First, on city water all is fine and the water fill switch is in the correct position. It was also replace less than a year ago. Water pump runs but no water or a very slight flow; the filter is not clogged.
Not sure where to go with this next other than replacing the pump. Are there check valves on the downstream site of the pump? I see two gray couplers in line before it enters the system; could these fail?
edit by staff - changed message icon to topic solved
Not sure where to go with this next other than replacing the pump. Are there check valves on the downstream site of the pump? I see two gray couplers in line before it enters the system; could these fail?
edit by staff - changed message icon to topic solved