Nick Pasich
Active member
- Joined
- Mar 19, 2011
- Posts
- 25
I just bought a 2016 Dutchman Denali 335RLK. It has a main TV in the back above the fireplace. It has a TV in the bedroom and it has a TV outside. We just took our first trip with this rig. The TV in the main part of the rig worked fine. However, neither of the other 2 TVs could/would receive a signal. On both TV's i scrolled through the sources and check each one. I thought that the first choice which is TV would be the one to go with. No signal.
In the storage area on the rig, there are 2 coax inputs. one is labeled satellite. The campground cable I screwed into the other input which gave me a signal on the main TV.
The TV in the bedroom has 2 coax connection, which I assume are cable and satellite. Same with the outside TV. Yet, no matter what I screw into , I don't get a signal. I spoke with another RV owner and he said that theres a switch in his control panel for selecting TV source. My panel doesn't have that.
Any suggestions greatly appreciated.
Help!!
P.S. On this rig and other rigs that I've owned, nea the bedroom TV where the crank up Over-the-air antenna is mounted, theres a push button and I don't know what that is for.
In the storage area on the rig, there are 2 coax inputs. one is labeled satellite. The campground cable I screwed into the other input which gave me a signal on the main TV.
The TV in the bedroom has 2 coax connection, which I assume are cable and satellite. Same with the outside TV. Yet, no matter what I screw into , I don't get a signal. I spoke with another RV owner and he said that theres a switch in his control panel for selecting TV source. My panel doesn't have that.
Any suggestions greatly appreciated.
Help!!
P.S. On this rig and other rigs that I've owned, nea the bedroom TV where the crank up Over-the-air antenna is mounted, theres a push button and I don't know what that is for.