OBD port location - can't find it
- Thread starter jhoog
- Start date
The friendliest place on the web for anyone with an RV or an interest in RVing!
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Larry N.
Well-known member
I don't know if a 1995 model has an OBD port, but those ports generally are under the dash near the steering wheel.
darsben
Well-known member
As it is most likely a 1994 Chassis I suspect OBD1 if any at all
R
rls7201
Guest
On your Ford F53 460, open dog house, look forward on the left side, about opposite of the gas peddle. You'll see the OBD 1 connector pluged into a protective shell.
If you need a picture or help with the codes, check in at this link on IRV2.com.
http://www.irv2.com/forums/f23/
There is a gentleman called subford. He is the most knowledgeable person I know when it comes to the old Ford F53 460 chassis. The man is brilliant with all things concerning the EEC-IV computer.
Richard
If you need a picture or help with the codes, check in at this link on IRV2.com.
http://www.irv2.com/forums/f23/
There is a gentleman called subford. He is the most knowledgeable person I know when it comes to the old Ford F53 460 chassis. The man is brilliant with all things concerning the EEC-IV computer.
Richard
Isaac-1
Well-known member
OBDII ports were mandated starting with the 1996 model year
NY_Dutch
Well-known member
Isaac-1 said:
The 1996 OBDII requirement only applied to cars and light trucks. The Ford F53 stripped chassis didn't get it until the 1999 model year.
NY_Dutch
Well-known member
HueyPilotVN
Well-known member
Now that tip alone was worth the cost of membership.
