G
Guest
Guest
I needed to get all my stuff up off the sink area so i used some old scrap walmart furniture peaces i had, some paint, and some of that perferated rubber matting (you see in tool boxes) for the top of the shelf.
The only down side is that there is no stud other than the far left and right. I didnt want to make the shelf that long so i used really course wood screws into the paneling. They did tighten up and the shelf seems quite secure however if i ever move the RV it could come loose via vibration with its own weight. So ill probably run a small bead of clear caulk along the topside to help with the vibration. But as you can see it turned out good and does its job.
Before and after pics
The only down side is that there is no stud other than the far left and right. I didnt want to make the shelf that long so i used really course wood screws into the paneling. They did tighten up and the shelf seems quite secure however if i ever move the RV it could come loose via vibration with its own weight. So ill probably run a small bead of clear caulk along the topside to help with the vibration. But as you can see it turned out good and does its job.
Before and after pics
