Danoglide54
New member
- Joined
- Sep 12, 2018
- Posts
- 4
Hi everyone,
My wife and I just bought a 2018 Winnebago Micro Minnie 2100BH a few weeks ago. I'm sure when we were looking inside at the dealer it was not plugged into 30amp service and I did check out the radio and it did power up and play. A few days later we came to pick it up and the Tech walked us through everything and we drove it home. That weekend we spent 2 days camping in our daughter's back yard plugged in to a 30amp service, everything worked like it's supposed to.
Since Florence is heading our way I got curious about running off the battery if we had to so I unplugged the 30amp cable and went inside to look it over. First I noticed the radio was dead so I already put some fresh water in the holding tank and the pump switch was on but when I opened the valve no water came out and the pump didn't sound off. Soooooo, I double checked the battery, it easily ran the power lift in the tounge. I looked in the cubby hole and double checked the battery cut off switch and it was correct. Checked all the 12 volt fuses especially the two 40 amp ones and last but not least I checked the voltage between the red and white cables on the circuit board and had no power. If I plugged in the 30amp cable there was voltage there of course.
Am I missing something here? Anybody have a clue what it may be?
Thanks,
Dano
My wife and I just bought a 2018 Winnebago Micro Minnie 2100BH a few weeks ago. I'm sure when we were looking inside at the dealer it was not plugged into 30amp service and I did check out the radio and it did power up and play. A few days later we came to pick it up and the Tech walked us through everything and we drove it home. That weekend we spent 2 days camping in our daughter's back yard plugged in to a 30amp service, everything worked like it's supposed to.
Since Florence is heading our way I got curious about running off the battery if we had to so I unplugged the 30amp cable and went inside to look it over. First I noticed the radio was dead so I already put some fresh water in the holding tank and the pump switch was on but when I opened the valve no water came out and the pump didn't sound off. Soooooo, I double checked the battery, it easily ran the power lift in the tounge. I looked in the cubby hole and double checked the battery cut off switch and it was correct. Checked all the 12 volt fuses especially the two 40 amp ones and last but not least I checked the voltage between the red and white cables on the circuit board and had no power. If I plugged in the 30amp cable there was voltage there of course.
Am I missing something here? Anybody have a clue what it may be?
Thanks,
Dano