OldGuyOnTheRun
Member
I have a 2000 Itasca Spirit 24', E350, Triton V10, new to me this year. My tow car is my '03 CRV(187k mi) with a DIY installed Roadmaster baseplate, Harbor Freight magnetic LED tail lights on top, and an old Roadmaster Explorer towbar donated by my friend Glenn. All the wiring and new 6way and 7way sockets were DIY installed including a power line from the RV to charge the CRV battery while towing. The brake system is Blue Ox Patriot 2.
The trip was from Ventura, Ca to Lake Forrest, CA...basically a run on the freeway. I climbed the Camarillo grade fine at about 50mph, had no overheating. The trip went pretty smoothly in spite of the traffic.
Not knowing what to expect, I was a little nervous about double checking everything. When checking out the CRV down in Lake Forrest I discovered that I was not able to move the shift lever from neutral to reverse and park. I was able to begin in neutral and run through the forward gears with the engine running to get it ready for towing. But I did not want to do a complete trouble shooting till I got back home.
At home this morning the shifter still would not move past neutral to reverse. I stepped on the brake with the ignition on and tried with no joy. After calling my Honda guy, I tried pressing on the shifter detente under the tab and could move to any gear while the detente was depressed. Good sign. But still I was unable to move it without pressing on the detente. Another call to my Honda guy. He said it was probably the brake light switch which powered the shifter detente release.
Mmmmmm. I wondered if I put the accessories fuse back in would that give me that brake light switch power back? HA! It worked.
I have already bought all the pieces to add a cut out switch for the accessories fuse - and - next time I tow I will surely remember to turn the circuit on when getting ready to drive away my CRV.
There is one remaining issue. I notice that after being stopped for a while and after powering up the brake and resetting it, the first time I press on the brake pedal, even gently, the CRV brake goes full on and it drags the RV to a stop. Obviously after the first time, I don't do that with any speed on. Does anyone have an idea why the brake would act that way the first time used after resetting? Again it's only the first depression, after that it is smooth and proportional. There is a tiny space between the brake system rear pad and the front of the driver's seat. (1/8 to 1/4 inch) Would that do it?
Alan
The trip was from Ventura, Ca to Lake Forrest, CA...basically a run on the freeway. I climbed the Camarillo grade fine at about 50mph, had no overheating. The trip went pretty smoothly in spite of the traffic.
Not knowing what to expect, I was a little nervous about double checking everything. When checking out the CRV down in Lake Forrest I discovered that I was not able to move the shift lever from neutral to reverse and park. I was able to begin in neutral and run through the forward gears with the engine running to get it ready for towing. But I did not want to do a complete trouble shooting till I got back home.
At home this morning the shifter still would not move past neutral to reverse. I stepped on the brake with the ignition on and tried with no joy. After calling my Honda guy, I tried pressing on the shifter detente under the tab and could move to any gear while the detente was depressed. Good sign. But still I was unable to move it without pressing on the detente. Another call to my Honda guy. He said it was probably the brake light switch which powered the shifter detente release.
Mmmmmm. I wondered if I put the accessories fuse back in would that give me that brake light switch power back? HA! It worked.
I have already bought all the pieces to add a cut out switch for the accessories fuse - and - next time I tow I will surely remember to turn the circuit on when getting ready to drive away my CRV.
There is one remaining issue. I notice that after being stopped for a while and after powering up the brake and resetting it, the first time I press on the brake pedal, even gently, the CRV brake goes full on and it drags the RV to a stop. Obviously after the first time, I don't do that with any speed on. Does anyone have an idea why the brake would act that way the first time used after resetting? Again it's only the first depression, after that it is smooth and proportional. There is a tiny space between the brake system rear pad and the front of the driver's seat. (1/8 to 1/4 inch) Would that do it?
Alan